Operation
6.4.5 "Serv." register (service)
This register is used to display, check and configure special device settings
and conditions. This application is only intended for service technicians
(specialists) or a calibration officer for putting the device into operation or
maintenance.
Display
Volume
Volume
conversion
Measured values Sub-menu for analogue measurements and the
Archives
Status
Date and time
Batteries
Inputs
Outputs
Interfaces
Device settings
Identification
Edit and delete
Examination
Data book
Meaning
Sub-menu for volume and the corresponding
parameters
Sub-menu for volume conversion and the corresponding
parameters
corresponding parameters
Sub-menu for existing archives in the device
Sub-menu for current status, status register and logs
Sub-menu for date, time and the corresponding
parameters
Sub-menu for device battery and the corresponding
parameters
Sub-menu for inputs and the corresponding parameters
Sub-menu for all outputs and the corresponding
parameters
Sub-menu for device interfaces
Sub-menu for all device settings
Sub-menu for the identification of the gas system
Sub-menu to activate a range of delete functions
Sub-menu with freeze function and archive with frozen
data
Sub-menu with information from the device data book
77