VISIONPRO® 8000 SMART THERMOSTAT
Dehumidification Away Mode
Dehumidification Away Mode protects the home when
unoccupied for long periods of time during hot and humid
weather by maintaining the desired humidity and
temperature settings.
To start Dehumidification Away Mode, press MENU, then
select Dehum Away Mode.
Fig. 136.
The thermostat automatically follows settings that are set
by the dealer during installer setup.
Press Cancel to end Dehumidification Away Mode.
Fig. 137.
33-00096—04
Set up Dehumidification Away Mode
1. Select Allowed at ISU 918. See Fig. 138.
2. Set Fan Control settings. See Fig. 139.
• On: Fan is always on.
• Automatic: Fan runs only when cooling system is
on.
• Circulate: Fan runs randomly, about 35% of the
time.
3. Set temperature and dehumidification settings. See
Fig. 140.
62
Fig. 138.
Fig. 139.