Honeywell TH8321 Product Data page 37

Connect to a hidden Wi-Fi
1. Touch MENU, then Wi-Fi Setup.
2. Touch Other, then Select.
3. When prompted, press the screen to edit the network
name.
4. Enter the network name.
 
Press the or buttons to change the letter or
number. Press the
character, or the

character. Use the
change letter case. Press Done when complete.
5. Select the appropriate network security setting, then
press Select.
6. Enter the Wi-Fi network password as explained above
in "Connecting to Wi-Fi Network", step 6.
Unsuccessful Wi-Fi connection
If you are unsuccessful in connecting the thermostat to the
Wi-Fi network, you will see a Connection Failed screen.

Press button for other tips about this failed connection.
Here are three specific reasons the connection might be
unsuccessful.
For all Connection Failed screens, pressing Done will
return to the Menu screen.
Invalid Password
The password you entered is invalid. Check that you have
the right password and try again.
No IP Address
The thermostat was unable to obtain an IP address from
the router. Verify the router is correctly set up to
automatically assign IP addresses. This connection can
take several minutes. If there is still no connection, remove
the thermostat from the wallplate for 10 seconds, then
snap it back into place.
®
network
button to move to the next
button to move to the previous

or buttons at the bottom to
VISIONPRO® 8000 SMART THERMOSTAT
No Internet Link
The thermostat connected to the Wi-Fi network but was
unable to establish a connection to the internet. Check the
router settings and try again. Make sure the Ethernet cable
is plugged into the router and try rebooting the router if
necessary.
DoaIol Inrol Madorl
Installer Options
WirelessNetwork
Enter Network Name
Press Here to Edit
Delete
AC
Open Network
37
Wi-Fi Setup
M35352
Other...
M35353
M35354
Space
M35346
SSID Security
M35355
33-00096—04