Honeywell TH8321 Product Data page 35

ISU Installer Setup
Number Name
-12% to 12% (in 1% increments)
1402 Indoor Humidity
Offset
On
1404 Alert Light Indicator
Off
[Dealer Name]
1500 Dealer Name
[Dealer Phone]
1500 Dealer Phone
[Dealer Email Address]
1501 Dealer Email
Address
[Dealer Website]
1501 Dealer Website
[Dealer Message]
1502 Dealer Message
Table 2. Installer Setup (ISU) Table. (Continued)
Settings Default
0%
On
None
None
None
None
None
VISIONPRO® 8000 SMART THERMOSTAT
Residential,
Commercial
or Both
Both 0% - No difference in displayed humidity and the
actual room humidity.
The thermostat displays up to 12% lower or higher
than the actual measured humidity.
Both The thermostat has a built in light indicator. When an
alert is active, the light will be on continuous if the
thermostat is powered with 24 VAC (C wire) or it will
flash if the thermostat is powered with batteries only.
The light also turns on when the system setting is set
to Em Heat.
Select On to use the light indicator or select Off to
turn off the light.
Both Dealer information is displayed to the user when an
alert is active and the user can access this
Both
information by selecting "Dealer Information" in the
Both
Menu.
Both
Both
35
Notes
33-00096—04