Table of Contents
Advertisement
Managing Dehumidification
Dehumidification function will maintain humidity below programmed setpoint using
onboard humidity sensor. For systems without reheat the dehumidification function
will allow cooling below the target setpoint based on programmed over cool offset. If
humidity threshold cannot be achieved once lower space temperature threshold has
been reached the dehumidification function will be suspended. For applications
with reheat function setpoint will be maintained during dehumidification cycle by
activating reheat using heating coil or via auxiliary heat (electric heat).
To configure dehumidification
1. Swipe left from the Home screen.
2. On the Quick access screen, tap
The Dehumidification screen appears. Enable the dehumidification
Managing Dehumidification
Figure 47 On-screen help
> Equipment > Dehumidification.
MANAGING DEHUMIDIFICATION
67
Advertisement
Table of Contents
