When Installing this Product...
1. Read these instructions carefully. Failure to follow the
instructions can damage the product or cause a haz-
2. Check the ratings given in the instructions to make
sure the product is suitable for your application.
3. Installer must be a trained, experienced service
4. After completing installation, use these instructions
to verify the product operation.
Finding Your Password (Date Code)
You will need the thermostat password to:
• Make changes to Installer Setup
• Perform an Installer Test
• Reset Thermostat to Factory Default Settings
The password (date code) is located on the back of the
thermostat (see Fig. 2)
VISIONPRO® 8000 SMART THERMOSTAT
Fig. 2. Finding thermostat password.
You can also find the password (date code) by pressing
MENU, selecting Dealer Information and then scrolling
down to see the Date Code.
Assembled in Mexico
Assemblé au Mexique