Honeywell TH8321 Product Data page 71

mostat will indicate whether this meets or may not
meet the ASHRAE 62.2 Standard or the Percent On
Time setting. See Fig. 168.
NOTE: ISU 1014 Lockout Ventilation on Humidifi-
cation or Dehumidification Calls is not an
option when you select ASHRAE is Priority at
ISU 1012.
Fig. 168.
11. Select whether to Ventilate on High Indoor Humidity.
See "Ventilate on High Indoor Humidity (ISU 1016)"
on page 68 for more information. See Fig. 169.
Fig. 169.
Control Ventilation Level
1. Touch MENU, and select Ventilation.
Fig. 170.
Ventilation
Equipment Status
Fig. 171.
2. Select Mode, Temporary Boost, or Lockout, then
3. Touch Done to save your settings. Touch Cancel to
Ventilation Options
Mode:
Auto: Ventilation runs as programmed by the installer.
Off: Ventilation remains off unless turned on using the
timer.
On: Ventilation is always on.
Temporary Boost: Touch
ventilation temporarily. To turn it off, set it to zero.
MCR34100
Lockout: Touch
Select Yes to prevent ventilation from running during the
MCR34132
Sleep or Unoccupied (commercial) program periods or
when outdoor conditions exceed values set by the installer.
71
VISIONPRO® 8000 SMART THERMOSTAT
select appropriate options.
Mode
Temporary Boost
Fig. 172.
ignore changes.
Fig. 173.
Ventilation Mode
Off Auto
Fig. 174.
 
or
Run Ventilation For
60 minutes
Fig. 175.
 
or to select Yes or No, then touch Next.
MCR34133
MCR34134
On
MCR34135
to select how long to run
MCR34136
33-00096—04