Setting The Time/Date; Setting The Fan - Honeywell TH8321 Product Data

VISIONPRO® 8000 SMART THERMOSTAT
NOTE: The screen lights when you press any button. After you complete your changes, the screen stays lit for 45 seconds.
Depending on how your thermostat was installed, the screen light may always be on.

Setting the Time/Date

1. Touch the current time. The screen displays Select
Option.
Fig. 30.
2. Touch Time or Date, then touch Select.
Select Option
Time
Fig. 31.
 
3. Touch or until the proper time/date is displayed.
33-00096—04
Fig. 29. Quick reference to commercial display.
MCR34092
Date
MCR34155
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here to set a program
schedule.
Current status. Shows system mode (heat/cool), outdoor
temperature (with optional outdoor sensor, or Wi-Fi
connection) and humidity (requires Wi-Fi connection).
Override. Touch to override program schedule.
Current schedule. Touch an arrow to change temperature
setting and set a Temporary Hold.
Current program status.
Indoor conditions. Shows indoor temperature and humidity.
Current time. Touch to set the current time/date.
Alert Light. On when alert message is active or system is set to
EmHeat.
4. Touch Done to save or Cancel to ignore changes.
Please Set Time
5. Touch Home to redisplay the Home screen.
NOTE: The date is not shown on the home screen; how-
ever, it should be set to allow the thermostat to
adjust time automatically for daylight saving time
and for other features such as vacation hold.

Setting the Fan

1. Touch FAN to display fan settings.
2. Touch On, Auto, Circ, or Follow Schedule.
40
®
6 :30 PM
MCR34094
Fig. 32.
MCR34096
Fig. 33.