MOUNTING C7089U1006 WIRED OUTDOOR
Do not mount the sensor:
• in direct sunlight.
• where hot or cold air blows on the sensor. Discharge line
from an outdoor compressor unit, vent or fan causes
inaccurate temperature readings.
• where snow, ice or debris can cover it.
Use the following steps to mount the sensor:
1. Remove the sensor from the mounting clip.
2. Mark the area on the location selected for mounting
the sensor mounting clip.
3. Mount the clip.
4. See "Wiring C7089U1006 Outdoor Sensor" on
NOTE: The screen lights when you press any button. After you complete your changes, the screen stays lit for 45 seconds.
Depending on how your thermostat was installed, the screen light may always be on.
Fig. 28. Quick reference to residential display.
VISIONPRO® 8000 SMART THERMOSTAT
Fig. 27. Typical locations for C7089U1006 Outdoor
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here to
set a program schedule.
Current status. Shows system mode (heat/cool),
outdoor temperature (with optional outdoor
sensor or Wi-Fi
connection) and humidity
(requires Wi-Fi connection).
Current schedule. Touch an arrow to change
temperature setting and select a Temporary or
Indoor conditions. Shows indoor temperature
Current time. Touch to set the current time/date.
Alert Light. On when alert message is active or
system is set to EmHeat.