Using Upload; Transfer Type - NEC Electra Elite IPK II Pc Programming Manual

Document Revision 1
58
3.0.2

Using Upload

Within the Upload dialog, perform an upload by completing the following:
1. Select a Transfer Type.
2. Select Transfer Type items.
3. If desired, select items via the Modify Filter.
4. Press the Start button.
5. After the upload is completed, press the Close button.

Transfer Type

Select a filter that controls the scope of KTS settings to upload. The
following Transfer Types are made available.
All: No filter, all KTS settings.
H
Card Configuration: Card packages settings.
H
System Data Partial (System Wide): System-based settings.
H
System Data Partial (Telephone): Telephone-based settings.
H
System Data Partial (Virtual Extension): Virtual Extension based
H
settings.
System Data Partial (Trunk): Trunk-based settings.
H
User Data: User specific settings.
H
Figure 33 Upload Dialog
Electra Elite IPK II
Communications