Copy - NEC Electra Elite IPK II Pc Programming Manual

Document Revision 1
8

Copy

The system data copy function allows copying of data from one item to another (e.g. one
trunk to another). This copy only applies to single PRG. Copy only appears on screens
where it is applicable. To copy an item, complete the following:
42
1. Press the Copy button
2. Specify the source to copy from.
3. Specify elements of the source to copy.
4. Specify the destination to copy to.
5. Apply changes.
Figure 24 System Data Copy
.
Electra Elite IPK II
Copy