Card Types; Adding A Card - NEC Electra Elite IPK II Pc Programming Manual

Electra Elite IPK II
Standard View
ard Types
3.0.1 C
In PCPro card types are categorized under the following three groups.
Trunk
Represented on the Card Configuration screen as 'blue' cards. Trunk
cards provide interfaces to lines such as PSTN, ISDN, T1, Tie, etc. being
used within the KTS. Trunk cards respectively use trunk ports (e.g., A
COI(8) card makes use of eight trunk ports).
Telephone
Represented on the Card Configuration screen as 'red' cards. Telephone
cards provide interfaces to telephones being used within the KTS.
Telephone cards use telephone ports (e.g., An ESI(8) makes use of
eight telephone ports).
Other
Represented on the Card Configuration screen as 'green' cards. These
miscellaneous cards don't have a direct relationship to a trunk or
telephone. However some cards like Voice Mail under this category use
telephone ports as they are associated with extensions.

Adding a Card

3.0.2
To add a card, complete the following steps:
1. With the mouse, right click on the slot where the card is intended to
reside.
2. A popup menu will appear listing the card types that can be installed
and the option to remove an existing card.
3. Select a card type relevant to the card to install.
4. A popup menu will appear listing cards associated with the selected
card type.
5. Select the desired card package.
The slot changes appearances indicating the card installed, firmware
version being used and port type and port range being used.
Card Type Color Id
Telephone Red
Trunk Blue
Other Green
Document Revision 1
Sample
13