NEC Electra Elite IPK II Pc Programming Manual page 40

Electra Elite IPK II
Standard View
1. Specify a Trunk Access Map to modify.
2. Specify the access type for each trunk.
3. Select a Night Mode.
4. Select which extensions use the Trunk Access Map during the selected
Night Mode.
Trunks
Specify access to trunks for extensions using the Trunk Access Map. To modify
the access type, right click the trunk then select an access type from the popup
menu. These settings are linked with 14-07.
The various access types are listed below:
No access
Outgoing access only
Incoming access only
Access only when trunk on hold
Outgoing access when trunk on hold
Incoming access when trunk on hold
Incoming/outgoing access
Incoming/outgoing access when trunk on hold
Night Mode
Assign which extensions use the Trunk Access Map for this Night Mode selection.
Do this by completing the following:
1. Select a Night Mode.
2. Select which telephones, during this Night Mode, use the Trunk Access
Map.
Extensions
Specify which extensions use the Trunk Access Map during the selected Night
Mode. These settings are linked with 15-06.
Access Type
Document Revision 1
Image
29