Display Settings; Audio Settings - Rohde & Schwarz FPC1000 User Manual

®
R&S FPC
3. Select the "Date Format" menu item in the "Regional" category.
4. Select the date format of your choice.
●
●
Selecting the length unit
1. Press the "Setup" key to open the setup menu.
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
3. Select the "Length Unit" menu item in the "Regional" category.
4. Select the length unit of your choice.
●
●

9.5 Display Settings

Remote commands required to configure the display:
●
Chapter 19.6, "Display
Adjusting the display backlight
The display backlight defines the brightness of the display.
You can adjust the backlight intensity of the display to get a good viewing experience
depending on the lighting conditions of your surroundings.
1. Press the "Setup" key to open the setup menu.
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
3. Select the "Display Backlight" menu item in the "Display" category.
4. Select the backlight intensity that you prefer.
The backlight intensity is a percentage from 0 % to 100 % with 100 % being the
brightest.

9.6 Audio Settings

Remote commands required to configure the audio output:
●
Chapter 19.7, "Audio
User Manual 1178.4130.02 ─ 07
"dd/mm/yyyy": day/month/year
"mm/dd/yyyy": month/day/year
"Meter": metric length unit
"Feet": imperial length unit
Settings",
Settings",
on page 215
on page 215
Instrument Setup
Audio Settings
43