Table of Contents
Advertisement
®
R&S
ESW
To perform a self-alignment
1. Press the [SETUP] key.
2. Select the "Alignment" softkey.
3. Select the "Start Self Alignment" button.
4. To abort the self-alignment process, select the "Abort Self Alignment" button.
Once the system correction values have been calculated successfully, a message
is displayed.
To display the alignment results again later
●
Press the [SETUP] key.
●
Press the "Alignment" softkey.
13.1.5 How to Align the Touchscreen
To align the touchscreen
1. Press the [Setup] key.
2. Select the "Alignment" softkey.
3. Select "Touch Screen Alignment".
A blinking cross appears in the lower left corner of the screen.
4. Touch and hold the blinking cross until it stops blinking.
Repeat this action for the crosses in the other corners.
13.2 Display Settings
13.2.1 Display Settings
Access: [Setup] > "Display"
Some general display settings are available regardless of the current application or
operating mode. For information on optimizing your display for measurement results,
see
Chapter 11.1, "Result Display
●
General Display
●
Displayed
●
Display Theme and
●
External Monitor
User Manual 1177.6298.02 ─ 08
Configuration",
Settings.......................................................................................306
Items.....................................................................................................307
Colors....................................................................................310
Settings...................................................................................... 314
General Instrument Setup
Display Settings
on page 190.
305
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
