How To Align The Touchscreen; Display Settings; General Display Settings - Rohde & Schwarz FSVA3000 User Manual

®
R&S FSVA3000/ R&S
4. To abort the self-alignment process, select "Abort Self Alignment".
Once the system correction values have been calculated successfully, a message
is displayed.
To display the alignment results again later
► Select [SETUP] > "Alignment".

10.1.5 How to align the touchscreen

To align the touchscreen
1. Press the [Setup] key.
2. Select the "Alignment" softkey.
3. Select "Touch Screen Alignment".
A blinking cross appears in the lower left corner of the screen.
4. Touch and hold the blinking cross until it stops blinking.
Repeat this action for the crosses in the other corners.

10.2 Display settings

10.2.1 Display settings
Access: [Setup] > "Display"
Some general display settings are available regardless of the current application or
operating mode. For information on optimizing your display for measurement results,
see Chapter 7.1, "Result display
● General display
● Displayed
● Display theme and
● External monitor
● Touch(screen)
10.2.1.1

General display settings

Access: [Setup] > "Display" > "General"
This section includes general screen display behavior and date and time display.
User Manual 1178.8520.02 ─ 08
®
FSV3000
settings........................................................................................691
items.....................................................................................................693
colors......................................................................................696
settings.......................................................................................701
settings.......................................................................................... 702
configuration", on page 502.
General instrument setup
Display settings
691