Configuration For All Measurement Types; Display Settings - Rohde & Schwarz R&S NRX User Manual

www.allice.de
®
R&S NRX

6 Configuration for All Measurement Types

6.1 Display Settings

User Manual 1178.5566.02 ─ 08
The main measurement dialog offers access to all measurement settings. The layout of
the dialog and how to open is are described in
log", on page 32.
In the navigation pane, you can directly set the unit and the resolution for numeric
results. These settings are also available under "Display".
The settings available for all measurements are described in the following, while mea-
surement-specific settings are described in
Result Displays", on page 71.
Access: Main measurement dialog > "Display"
The available display settings depend on the measurement type and whether the result
display is numeric or graphical:
●
Resolution and unit of a measurement
●
Graphical or numerical display of measured values
●
Scaling parameters for graphical display
The statistics measurement has no "Display" settings, but you can scale the display.
Figure 6-1: Display dialog, example for time gate measurement
Resolution..................................................................................................................... 51
Unit................................................................................................................................51
Forward Unit..................................................................................................................52
Allice Messtechnik GmbH
Configuration for All Measurement Types
Chapter 4.1.2, "Main Measurement Dia-
Chapter 7, "Measurement Types and
Display Settings
50