Menu Settings; Changing Settings Using The Menu - Sony BPU4500 Operation Manual

Menu Settings

The device and system status can be monitored and settings
can be modified using the menu displayed in the video output
configured for the monitor output (M).

Changing Settings using the Menu

The menu screen is controlled using the knob and levers in the
MENU control block on the front panel.
Pushing the control knob and setting the CANCEL/ENTER
level to ENTER have the same function.
DISP/MENU lever and indicator
CANCEL/ENTER lever
MENU
CANCEL
DISP
MENU ENTER
Control knob
To display a menu page
Set the DISP/MENU lever to the MENU position.
When first powered on, the TOP MENU page is displayed.
To display the TOP MENU screen
In menu display mode, turn the control knob to move the ,
cursor to TOP in the upper right corner of the menu page, then
press the control knob.
The TOP menu showing the menu configuration is displayed.
< T O P M E N U >
c CO N F I G U R A T I O N
D I A G N O S I S
Menu
CONFIGURATION
DIAGNOSIS
To select a menu from the TOP MENU
Turn the control knob to move the , cursor to the desired
menu and push the knob.
The last accessed page in the selected menu will be
displayed.
30
Menu Settings
Description
BPU configuration settings.
Displays the device status.
To change page
1
Check that the , cursor is pointing to the page
number then push the control knob.
The , cursor changes to a flashing ? (question mark).
<O UTP UT FO RMA T>
S LOT 1: C 384 0x2 16 0 2 SI
OE TF: ( SDR )
S LOT 2: C 384 0x2 16 0 2 SI
OE TF: S DR
S LOT 3: C 192 0x1 08 0 E C
OE TF: S DR
S LOT 4: M 192 0x1 08 0 E C
OE TF: S DR
H DR OUT : - --
H D C UTO UT : O FF
2
Turn the control knob to flip through the pages, and
push the knob when the desired page is displayed.
The ? (question mark) changes back to ,. Items on the
page can now be selected.
To set a menu item
If ? (question mark) is displayed to the left of the page number,
push the control knob to change to the , cursor. Settings on
the displayed page can now be modified.
1
Turn the control knob to move the , cursor to the
desired item and push the knob.
The , cursor changes to a flashing ? (question mark).
2
Turn the control knob to change the setting.
To cancel a changed setting
Set the CANCEL/ENTER lever to CANCEL before
pushing the control knob to restore the original setting.
To cancel menu changes
Set the DISP/MENU switch to MENU to turn off the menu
screen display.
The menu setting operation can be restarted by setting
the DISP/MENU switch to MENU again.
3
Push the control knob.
The ? (question mark) changes back to ,, and the item
setting is registered.
4
To change other settings on the same menu page,
repeat steps 1 to 3.
To set a menu item with multiple input fields
Some menus have items with multiple input fields.
If you press the control knob when the , cursor is pointing to
an item with multiple input fields, the input fields are displayed
for setting each input field.
The cursor is moved by turning the control knob.
Flashing
? C0 3 T OP
3G (L v-A )
C OLO R: NO RMA L
3G (L v-A )
C OLO R: NO RMA L
3G (L v-A )
C OLO R: NO RMA L
HD -S DI
C OLO R: NO RMA L