Select And Custom Output Resolution; Screen Parameter Setting - RGBlink VSP 268 Quick Start Manual

Select and custom output resolution

Select the output resolution:
Push [MENU] button to enter menu, select <OUTPUT>, push the knob to enter. Rotate the knob and select
<OUTPUT FORMAT>, push the knob to enter. Rotate the knob and select <STANDARD>, push the knob to
enter. Rotate the knob to select the desired resolution.
Custom output resolution:
Push [MENU] button to enter menu, select <OUTPUT>, push the knob to enter. Rotate the knob and select
<OUTPUT FORMAT>, push the knob to enter. Rotate the knob and select <CUSTOMIZE>, push the knob to
enter;
Firstly set the custom width resolution, input the value by pushing the number buttons, push the knob to confirm.
Secondly set the custom height resolution, input the value by pushing the number buttons, push the knob to
confirm.
Lastly set the custom frame rate, input the value by pushing the number buttons, push the knob to confirm.
After setting the values, the device will start to configure accordingly, taking 5~10 seconds to complete.

Screen Parameter Setting

The screen parameter setting is for the size of LED display applying for the single image model for example, the
LED display resolution is 1408 x 832 pixel pitch, first, we select a resolution that close to 1408 x 832 or a higher
resolution to make sure the image will be showed in the LED, so, we select the 1440 x 900 which is the most
close to the LED resolution.
Touch [MENU] button, LCD shows the main menu, rotate the knob, select<Output> and rotate the knob to
confirm, touch the knob, select < Screen Parameter>, press the knob to confirm, enter the screen parameter menu,
you will see the size setup of LED display as follows:
H Size: Use the knob and number key to set up parameter 1408;
V Size: Use the knob and number key to set up parameter 832;
H Position: initial parameter is 0, no setting without image movement;
10
Address：S601-607, S504 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn