Introduction; Purpose Of The Design Guide; Organisation; Additional Resources - Danfoss VLT AQUA Drive FC 202 Design Manual

Introduction

1 1
1 Introduction

1.1 Purpose of the Design Guide

This design guide for Danfoss VLT
converters is intended for:
•
Project and systems engineers
•
Design consultants
•
Application and product specialists
The design guide provides technical information to
understand the capabilities of the frequency converter for
integration into motor control and monitoring systems.
The purpose of the design guide is to provide design
considerations and planning data for integration of the
frequency converter into a system. The design guide caters
for selection of frequency converters and options for a
diversity of applications and installations.
Reviewing the detailed product information in the design
stage enables developing a well-conceived system with
optimal functionality and efficiency.
®
VLT is a registered trademark.

1.2 Organisation

Chapter 1 Introduction: The general purpose of the design
guide and compliance with international directives.
Chapter 2 Product Overview: The internal structure and
functionality of the frequency converter and operational
features.
Chapter 3 System Integration: Environmental conditions;
EMC, harmonics and earth leakage; mains input; motors
and motor connections; other connections; mechanical
planning; and descriptions of options and accessories
available.
Chapter 4 Application Examples: Samples of product
applications and guidelines for use.
Chapter 5 Special Conditions: Details on unusual operational
environments.
Chapter 6 Typecode and Selection: Procedures for ordering
equipment and options to meet the intended use of the
system.
Chapter 7 Specifications: A compilation of technical data in
table and graphics format.
8
Design Guide
®
AQUA Drive frequency
Danfoss A/S © 09/2014 All rights reserved.
Chapter 8 Appendix - Selected Drawings: A compilation of
graphics illustrating mains and motor connections, relay
terminals, and cable entries.

1.3 Additional Resources

Resources available to understand advanced frequency
converter operation, programming, and directives
compliance:
•
®
The VLT AQUA Drive FC 202 Operating Instructions
(referenced as Operating Instructions in this
manual) provide detailed information for the
installation and start up of the frequency
converter.
•
®
The VLT AQUA Drive FC 202 Design Guide
provides information required for design and
planning for integration of the frequency
converter into a system.
•
®
The VLT AQUA Drive FC 202 Programming Guide
(referenced as Programming Guide in this manual)
provides greater detail about how to work with
parameters and many application examples.
•
®
The VLT Safe Torque Off Operating Instructions
describe how to use Danfoss frequency
converters in functional safety applications. This
manual is supplied with the frequency converter
when the STO option is present.
•
®
The VLT Brake Resistor Design Guide explains
optimal brake resistor selection.
Supplemental publications and manuals are available for
download from danfoss.com/Product/Literature/Technical
+Documentation.htm.
NOTICE
Optional equipment is available that may change some
of the information described in these publications. Be
sure to see the instructions supplied with the options for
specific requirements.
Contact a Danfoss supplier or visit www.danfoss.com for
additional information.
MG20N602