Danfoss VLT AQUA Drive FC 202 Design Manual page 118

Typecode and Selection
Description
Software
release
Software
language
Table 6.1 Ordering Type Code
1) Some of the available choices depend on the enclosure size.
2) Only available for frequency converters
3) Only available for frequency converters
Description
A options
6 6
B options
C0 options
C1 options
C option
software
D options
Table 6.2 Ordering Type Code, Options
NOTICE
For power sizes over 90 kW, see the VLT
202 110-1400 kW Design Guide.
116
Design Guide
Position 1)
Possible choices
24- SXXX: Latest release – standard
27 software
28 X: Not used
≥ 75 kW.
≥ 355 kW.
Position Possible choices
29- AX: No A option
30 A0: MCA 101 PROFIBUS DP V1
(standard)
A4: MCA 104 DeviceNet
(standard)
AN: MCA 121 Ethernet IP
AL: MCA 120 ProfiNet
AQ: MCA 122 Modbus TCP
31- BX: No option
32 BY: MCO 101 extended cascade
control
BK: MCB 101 general purpose
I/O option
BP: MCB 105 relay option
B0: MCB 109 I/O option with
RTC back-up
B2: MCB 112 PTC thermistor
card
B4: MCB 114 VLT sensor input
33- CX: No option
34
35 X: No option
R: MCB 113 Ext. relay card
5: MCO 102 Advanced cascade
control
36- XX: Standard controller
37
38- DX: No option
39 D0: Extended 24 V DC back-up
®
AQUA Drive FC
Danfoss A/S © 09/2014 All rights reserved. MG20N602