Receiving; Table 3.2 Inspection Upon Delivery - Emerson Branson 2000 Series Instruction Manual

100-214-251 IWoper.book Page 35 Friday, June 16, 2017 4:12 PM
3.2

Receiving

The Integrated Welder is a sensitive electronic device. Many of its components can be
harmed if the unit is dropped or otherwise mishandled.
CAUTION
Scope of Delivery
Branson Integrated Welder units are carefully checked and packed before dispatch. It is
recommended, however, that you follow the inspection procedure below after delivery.
3.2.1 To inspect the Integrated Welder when it is delivered,
take the following steps:
Table 3.2
Step
1
2
3
4
NOTICE
If the goods delivered have been damaged during shipping, please contact the
forwarding agent immediately. Retain packing material (for possible inspection or for
sending back the unit).
CAUTION
100-214-251 REV. 05
Heavy Object
The Integrated Welder is heavy. Handling, unpacking, and installation
may require assistance or the use of a lifting device.
Inspection upon delivery
Verify that all parts are complete according to the packing slip.
Check the packing and the unit for damage (visual inspection).
Report any damage claims to your carrier immediately.
Determine if any component has become loose during shipping and, if
necessary, tighten screws.
Heavy Object
The Integrated Welder is heavy. Handling, unpacking, and installation
may require the assistance of a colleague or the use of lifting
platforms or hoists.
Action
35