User Check Menu - horiba HP-200 Instruction Manual

Measurement

User check menu

Entering the User check menu allows you to check the display part or the transmission output
or to initialize the settings.
Entering the User check menu
1. Hold down the HOLD key in the meas mode until the HOLD indicator turns ON.
2. Press the [ / ] key to display "USr" on the display part for the measured value.
3. Press the [ENT] key.
4. Press the [ / ] key to display a desired item on the auxiliary display part.
5. Press the [ENT] key.
Hold down the [HOLD] key
Hold down the [ESC] key
44
<User check menu>
Display of
various
calibration
parameters
Changes
the value
Establishes
the value
Cancels the
value