horiba HP-200 Instruction Manual page 39

Screen 1 Screen 2
Table 2 <Items displayed on Setup menu
Setting
Description
range
Set the moving
average count 1 to 50
(damping factor).
"yES",
Set auto return
Set auto return
time. 24(h)
Initial
value
Set the moving average count.
1 Change the value when the measured
value is not stable enough.
This setting determines whether the hold
mode automatically returns to the meas
mode. Selecting "yES" enables auto
return.
"yES"
"no"
Note: Auto return does not occur during
any setting change or calibration even if
"yES" is selected.
This setting determines the time for auto
return from the hold mode to the meas
1 to mode. Enter hours.
2
Note: This setting is only displayed when
auto return is set to "yES."
Measurement
Remarks
31