Display window on the remote
Track number/Total number of tracks in a
Refer to "To change the display on the
remote" ( next).
Play mode and repeat mode information
( pages 43, 44)
Sound setting ( page 45)
To change the display on the remote
Press DISPLAY repeatedly. Each time
you press the button, the display changes
cyclically as follows.
Track number and elapsed time
Track number and remaining time of the current
Track number and track name
Track number and artist name (Hi-MD) / Group
Track number and album name (Hi-MD) / Disc
Number of tracks in the disc, play mode and
Track number, recording date and time
Track number and audio format information
The items that are displayed differ according
to the selected play mode. (Example: When the
play mode is set to "Group", "Group" and "
Group name" appear.)
Recording date and time are displayed if they have
been recorded on the track.
Recording mode, codec and bitrate information
appear for discs used in Hi-MD mode, and
recording mode information appears for discs used
in MD mode.
• Depending on the group settings, the operating
conditions, and the disc settings, you may not be
able to select certain indications or the indications
may appear differently.
• When playing a VBR (Variable Bit Rate) MP3
audio track, the displayed bit rate may differ from
the bit rate displayed in the SonicStage software.
• When the Virtual-Surround, 6-Band Equalizer
and Dynamic Normalizer are active, their setting
conditions are displayed in the Spectrum Analyzer.