The rechargeable battery cannot
be charged sufﬁciently through
USB bus power.
The installation was not
The installation appears to have
stopped before it has completed.
The progress bar on the display is
not moving or the access lamp has
not lit for a few minutes during the
You cannot record audio data
when you press and slide the REC
switch while using the MD Simple
Even though the recorder is
recognized by the computer, it
does not operate normally.
The recorder cannot be used as a
The playing time of a transferred
track is different from the time
that appears on your computer
Case and/or corrective action
If you operate the recorder while it is connected to a computer, it
takes time for the rechargeable battery to be sufﬁciently charged
by USB bus power. For faster charging, do not operate the
You are using an OS that does not support this software ( page
All windows applications are not closed. If you start the
installation while other programs are running, a malfunction
may occur. This is especially true for programs that require large
amounts of system resources, such as virus-check software.
There is not enough hard disk space on your hard disk. You need
200 MB or more free space on your hard disk.
Check for the appearance of an error message beneath the
installation window. Press the [Alt] key or [Tab] key to display
any message that has appeared, and then follow the displayed
instructions. If there is no message, the installation is still in
progress. Wait a little while longer.
The installation is progressing normally. Please wait. The
installation may take 30 minutes or more, depending on your CD
drive or system environment.
The recorder is not correctly connected to the computer. Connect
the recorder and your computer correctly using the USB cable.
Audio CD is not inserted in CD drive of the computer. Insert
The capacity of the disc is insufﬁcient. Insert another disc.
A USB hub is used. Connect the USB cable directly to the USB
port of the computer.
You are using the recorder at a place with vibration. Use the
recorder at a place with no vibration.
The SonicStage or MD Simple Burner software is active. Close
the SonicStage or MD Simple Burner software.
This is due to a calculation discrepancy between the recorder and