Preparing a Power
Charge the rechargeable battery before using
it for the ﬁrst time or when it is depleted.
Operations can be done on the recorder or the
remote while charging.
Slide and open the battery
compartment lid in the direction of
Insert the rechargeable battery.
Insert it starting with the
Insert the battery with
the label side facing up.
Close the lid.
Connect the AC power cord and the
USB cable to the AC power adaptor.
AC power adaptor
Connect the other end of the USB
cable to the recorder and the AC
power cord to a wall outlet.
To the USB cable
Conﬁrm that charging has started.
When charging starts,
charging time ("Charging --min left")
appear at the start of charging. When the
charging time disappears, charging ends
once and the battery becomes sufﬁciently
charged. A completely depleted battery
takes about one hour to reach this point,
at which time it is approximately 80%
charged. For a 100% charge, an additional
2 hours of charging is needed.
If the charging time indication disappears
after a short time, this means the battery is
AC power cord
To a wall