Displayed Items During Recording - Sony MZ-M200 Hi-MD Music Transfer Version 1 for Mac (User Manual) Operating Instructions Manual

Displayed items during
recording
Display window on the recorder
 Battery indication (  page 15)
 Operation lamp
• During recording: lights up (red)
• During recording pause: flashes (red)
• When the remaining recording time on
the disc is less than 3 minutes: flashes
slowly (red)
• When recording with the microphone:
flashes according to the sound level
(Voice mirror) (red)
 Information display 1
• Level meter (graphic above)
• Operation mode (example: Hi-MD)
• Recording mode (example: Hi-SP)
• Synchro-recording indication (SYNC)
 Information display 2
Refer to "To change the display on the
recorder" (  next).
To change the display on the recorder
Press DISPLAY/MENU repeatedly. Each
time you press the button, the display changes
cyclically as follows. (Recording level meter
appears on the information display 1 ( on
the left column of this page) while recording.)
While recording/while the recorder is
stopped
 Group number, track number and elapsed time
Group number, track number, remaining
recording time and remaining free space
Number of tracks after the current track and
remaining time after the current location on
the disc
2)
REC property (current recording settings such
as recording level, microphone setting, etc.)
(  page 32)
Current date and time
Spectrum Analyzer (Standard)
Spectrum Analyzer (Circle)
1)
Remaining free space appears only when the
disc is used in Hi-MD mode and the recorder is
stopped.
2) Appears only when the recorder is stopped.
Shows the level of each of the following
3)
frequencies for both the L-channel and R-channel:
100 Hz, 250 Hz, 630 Hz, 1.6 kHz, 4 kHz, 10 kHz.

1)




2)3)

2)3)
35