Replacing Discs While Playing A Disc - Sony SCD-C222ES Operating Instructions Manual

You can change the displayed language if the TEXT disc
has multi language capacity. When the player detects such
a TEXT disc, "VEXT" and "MULTI" appear in the display.
Change the language according to the procedures below.
Press MENU in stop mode.
Turn w<1 ANTS DO! until "LANGUAGE" appears in
the display.
Press o<K1 AMS Dw.
The current selected language (English, French,
German, etc.) flashes.
If the player cannot display the language used in a
TEXT disc, "Other Lang" appears in the display.
Turn w<1 AMS DOL until the desired language
appears in the display.
Press I-44 AMS DDU.
After a few seconds, the information appears in the
selected language.
Replacing Discs While
Playing a Disc
You can open the disc tray while playing a disc so that
you can check what discs are to be played next and
replace discs without interrupting play of the current disc.
EX-CHANGE
I DISC SKIP
Press EXCHANGE.
The disc tray opens and two disc compartments
appear. Even if the player is playing a disc, it doesn't
stop playing.
Replace discs in the compartments with new ones.
The player plays the disc on the left side compartment
after the current disc, and then the one on the right
side compartment.
Press DISC SKIP.
The disc tray turns and other two disc compartments
appear.
Replace discs in the compartments with new ones.
Press EXCHANGE.
The disc tray closes.
Note
Do not push the disc tray to close it in Step 5, as you may damage
the player.
While the disc tray is open by pressing the EX-CHANGE button
l
If the play of the
current disc ends, the player stops playing. If
the disc is played in 1 DISC Repeat Play mode (page 18), the
current disc starts playing again.
l
In ALL DISCS Shuffle Play mode (page 19), tracks are
reshuffled on the current disc.
l
In Program Play mode (page 20), only the tracks on the current
disc are played