While Playing - Sony Walkman MZ-NF610 Operating Instructions Manual

Fm/am portable minidisc recorder
Hide thumbs Also See for Walkman MZ-NF610:
Table of Contents

Advertisement

Symptom
Cause/Remedy
"IYFULL"
appears
• This is due to the MiniDisc
system limitation.
When 254 tracks
even before the disc
have been recorded
on the disc, "TrFULL"
appears regardless
of
has reached the
the total recorded
time. More than 254 tracks cannot be recorded
maximum
recording
on the disc.
time (60, 74, or 80
_
"ib continue recording,
erase unnecessary
tracks.
minutes)
and the
recording
cannot be
lone.
The remaining
• This is due to the MiniDisc
system limitation.
Tracks of under
recording
time does
12 seconds (in SP stereo), 24 seconds (in LP2 stereo mode or
not increase even
monaural),
or 48 seconds (in LP4 stereo mode) in length are not
after erasing
counted and so erasing them may not lead to an increase in the
numerous
short
recording
time.
tracks.
While playing
Symptom
Cause/Remedy
An MD is not
• Repeat play is selected.
played normally.
_
Use MENU on the recorder
to change back to the normal play.
• Playback mode is changed.
Use MENU on the recorder
to change back to the normal play.
An MD is not
• Disc playing stopped before it came to the last track.
played from the
_
Press _
(or l=_l I on the remote control) for 2 seconds or
first track,
more to start playing
Playback sound
• The recorder
is placed where it receives continuous
vibration.
skips.
_
Put the recorder on a stable place.
• A very short track may cause sound to skip.
Try not to create a track under one second long.
Sound has a lot of
• Strong magnetism
from a television
or such device is interfering
tatic,
with operation.
Move the recorder away from the source of strong magnetism.
The volume of the
• The track was recorded
in analog (When recorded
in digital, the
recorded
track is
recording
level will be automatically
adjusted as same as the sound
low.
source), or you used a connecting
cord with an attenuator.
Use a correct connecting
cord.
• The recording
level was low.
Adjust the recording
level manually
when recording.
Volume cannot be
• AVLS is on.
turned up.
_
Release AVLS settings (page 59).
74

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents