System Of Treatment Of Exhaust Gases - Setting; Automatic Regeneration Of The Diesel Particulate Filter - Eat Regeneration Auto - Zetor PROXIMA HS Series Operator's Manual

SYSTEM OF ADDITIONAL TREATMENT OF EXHAUST GASES

System of treatment of exhaust gases - setting

The regeneration of the diesel particulate filter in case of increased temperature of exhaust gases is
performed at higher engine load. The system of regeneration of the diesel particulate filter DPF can be
controlled through the menu of the engine setting on the instrument panel. The regeneration is operated in
two modes: The mode of automatic regeneration of the diesel particulate filter and inhibition of regeneration
of the DPF filter (for safety reasons only).
Enter the menu of the engine setting by long pressing the button ( A ) on the instrument panel. The service
menu screen ( b ) is displayed. To enter the engine setting ( c ), choose the corresponding tab using the
buttons ( B ) and ( C ) and confirm it by longer pressing the button ( A ). The following items are displayed on
the screen:

1 - Automatic regeneration of the diesel particulate filter - EAT REGENERATION AUTO

2 - Inhibition of regeneration of the diesel particulate filter - EAT REGENERATION INHIBIT
Automatic regeneration of the diesel particulate filter - EAT REGENERATION AUTO
The mode of automatic control of the treatment of exhaust gases. The regeneration of the filter is started in
case of need when a certain level of filling of the filter with carbon black, temperature of exhaust gases and
engine load are reached.
Flashing of the green signal lamp indicates that regeneration of the diesel particulate filter is
being performed.
EAT REGENERATION AUTO is set in the menu for setting the engine ( b ). After entering the tab, choose
the corresponding item using the buttons ( B ) and ( C ). Confirm the mode of automatic control of the filter
regeneration ( b ) by long pressing the button ( A ). During operation of the tractor the filter regeneration is
indicated by activation of the signal lamps of the diesel particulate filter on the instrument panel and by the
subsequent acoustic signal. If the filter is regenerated, the green signal lamp of DPF is on. An approaching
defect of the system is indicated by activation of the yellow signal lamp of DPF and if the defect of the
system occurs, the red signal lamp of DPF is activated.
For proper functioning of the diesel particulate filter it is necessary to set the system of
treatment of exhaust gases to the mode EAT REGENERATION AUTO, unless working conditions
require inhibition of the system for safety reasons!
S15N023
S15N021
77