Zetor PROXIMA HS Series Operator's Manual page 53

When the key in the switch box is moved to position I, the
home screen is displayed on the display.
After about three seconds the main screen is displayed on
the display.
In the main field (1) the travel speed of the tractor is
displayed. In the secondary field (2) the current time in 24-
hour format is displayed.
There are data regarding PTO shafts in this screen.
1. Front PTO shaft revolutions, if the shaft is activated.
2. Rear PTO shaft revolutions, when the shaft is switched
on.
3. Tractor travel speed.
In the main field (1) the total moto hours worked by the
tractor are displayed.
In the secondary field (2) the total moto hours worked by
the tractor from the last resetting of the data are displayed.
INSTRUMENT PANEL
52
C15N030
PW15N003
PW15N004
PW15N005