9.2
Head Joint Rubber, Head/carriage Unit and CR Timing Belt
(1) Plug the Power cord into an electrical outlet.
Power cord
(2) Switch the machine to the maintenance mode and press the 6, 3, Mono Start, and *
keys in this order to automatically move the Head/carriage unit to the position shown
in the figure.
(3) Pull out the Power cord from the electrical outlet.
(4) Open the Scanner cover.
Head/carriage unit
Power cord
Machine body
Scanner cover
Fig. 3-1
Fig. 3-2
3-27
Power switch
Panel ASSY
Confidential