Firmware Switch Setting And Printout; Firmware Switch Setting (Maintenance Mode 10) - Brother MFC8440D Service Manual

7/13/2019
3.6

Firmware Switch Setting and Printout

3.6.1 Firmware switch setting (Maintenance mode 10)

< Function >
The machine incorporates the following firmware switch functions which may be activated
with the procedures using the control panel keys and buttons.
The firmware switches have been set at the factory in conformity to the communications
standards and codes of each country. Do not disturb them unless necessary. Some
firmware switches may not be applicable in some versions. The firmware switch data list
indicates "Not used." for those inapplicable switches.
WSW No.
WSW 01
WSW 02
WSW03
WSW 04
WSW 05
WSW06
WSW 07
WSW 08
WSW 09
WSW 10
WSW 11
WSW 12
WSW13
WSW 14
WSW 15
WSW 16
WSW 17
WSW 18
WSW 19
WSW 20
WSW21
WSW 22
WSW 23
WSW24
WSW25
WSW 26
WSW 27
WSW 28
WSW 29
WSW 30
WSW 31
WSW 32
WSW 33
WSW 34
http://slidepdf.com/reader/full/brother-8840d-service-manual
Brother 8840D Service Manual
Firmware Switches (WSW01 through WSW50)
Dial pulse setting
Tone signal setting
PABX mode setting
TRANSFER facility setting
1st dial tone and busy tone detection
Pause button setting and 2nd dial tone detection
Dial tone setting 1
Dial tone setting 2
Protocol definition 1
Protocol definition 2
Busy tone setting
Signal detection condition setting
Modem setting
AUTO ANS facility setting
REDIAL facility setting
Function setting 1
Function setting 2
Function setting 3
Transmission speed setting
Overseas communications mode setting
TAD setting 1
ECM setting
Communications setting
TAD setting 2
TAD setting 3
Function setting 4
Function setting 5
Function setting 6
Function setting 7
Function setting 8
Function setting 9
Function setting 10
Function setting 11
Function setting 12
7-9
MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
Function
SERVICE MANUAL
275/361