Brother MFC-J3520 Service Manual page 53

Code 1 Code 2
50 01 Vertical resolution capability changed after
compensation of background color.
63 01 Password plus "lower 4 digits of telephone number"
not coincident.
63 02 Password not coincident.
63 03 Polling ID not coincident.
63 04 Commanded confidential ID and MailBox ID not
coincident.
63 05 Relay broad-casting ID not coincident.
63 06 Commanded Retrieval ID and MailBox Retrieval ID
not coincident.
63 09 There is no box No. specified by F code
communication.
63 10 SID frame is not sent at the time of remote
registration to bulletin board using F code.
63 11 PWD frame is not sent at the time of remote
retrieval of confidential data using F code.
63 12 Password specified by F code does not match.
74 XX DCN received.
80 01 Fallback impossible.
90 01 Unable to detect video signals or commands within
6 seconds after CFR is transmitted.
90 02 Received PPS containing invalid page count or
block count.
A0 03 Error correction sequence not terminated even at
the final transmission speed for fallback.
A0 11 Receiving buffer empty (5 seconds time-out.)
A0 12 Receive buffer full during operation except
receiving into memory.
A0 13 Decoding error continued on 500 lines or more.
A0 14 Decoding error continued for 15 seconds or more.
A0 15 Timeout: 13 seconds or more for one-line
transmission.
A0 16 RTC not detected and carrier off detected for 6
seconds.
A0 17 RTC detected but command not detected for 60
seconds or more.
A0 19 No image data to be sent.
A0 20 Continue ColorFAX receiving impossible.
(ink remaining low.)
Cause
2-19
Refer to page:
Section 4.9.3
"A communications
error occurs"
Confidential