6.1
Check head nozzles (Maintenance mode 09)
Check head nozzles, referring to
6.2
Adjustment of vertical print lines/software correction for inclination/
corrugation/ruled lines (Maintenance mode 65)
Refer to
Chapter 5, Section 1.3.23 "Adjustment of Vertical Print Lines/Software
Correction for Inclination/Corrugation/Ruled Lines."
6.3
Update paper feeding correction values (Maintenance mode 58)
Refer to
Chapter 5, Section 1.3.19 "Updating of Paper Feeding Correction Values."
6.4
Adjust margins in borderless printing (Maintenance mode 66)
Refer to
Chapter 5, Section 1.3.24 "Margin Adjustment in Borderless Printing."
6.5
Check printing
To make a final check after replacement of the parts, print test patterns for updating the
paper feeding correction values, adjustment of vertical print lines/software correction
for inclination/corrugation/ruled lines/margins in borderless printing.
Update the paper feeding correction value
Check the test patterns, referring to
Feeding Correction Values."
Adjustment of vertical print lines/software correction for inclination/corrugation/ruled lines
Check the test patterns, referring to
Print Lines/Software Correction for Inclination/Corrugation/Ruled Lines."
Adjust margins in borderless printing
Check the test patterns, referring to
Borderless Printing."
Section 2.3 "Check head nozzles."
Chapter 5, Section 1.3.19 "Updating of Paper
Chapter 5, Section 1.3.23 "Adjustment of Vertical
Chapter 5, Section 1.3.24 "Margin Adjustment in
4-22
Confidential