SAGEMCOM Dr. Neuhaus ZDUE-GPRS-PLUS-VI User Manual page 55

Service commands
R3 commands:
ZDUE-GPRS-PLUS-VI
1. Reading GPRS operating parameters:
Command format: <SOH>R3<STX>S96(12)<ETX><BCC>
Reply format: <STX>S96(12)(LocalIP)(NetMask)(Gateway)(DNS1)(D
NS2) <ETX><BCC>
The parameters have the following meaning here:
LocalIP IP address currently assigned to the device. If the device
currently has no address assigned to it, "000.000.000.000" is
output.
NetMask This value remains empty
Gateway This value remains empty
DNS1 Current DNS1
DNS2 Current DNS2
Example (reply): <STX>S96(12)(172.20.233.0)()()(139.007.030.125)(139.
007.030.126)<ETX><BCC>
This command is also permitted via the GSM interface.
When GPRS mode is deactivated this command is unknown and will be
rejected with an error message:
Reply in case of error: <ETX>(ERROR01)<ETX><BCC>
GPRS Modes
Page 55 of 63