Table of Contents
Advertisement
7 GPRS Modes
7.1 Configuration
Configuration
options
Remote
configuration via the
GSM network
Local configuration
Remote
configuration via
GPRS (fixed IP
service)
ZDUE-GPRS-PLUS-VI
In GPRS mode it is possible, as an alternative to communication via CSD, to
establish a data connection via the GPRS network to the ZDUE-GPRS-
PLUS-VI and the meters connected to it.
In this case the ZDUE-GPRS-PLUS-VI functions as an IP server to which an
IP connection must be established from a client (e.g. a control centre).
Attention
In order to be able to operate the ZDUE-GPRS-PLUS-VI in GPRS mode, a
SIM card enabled for GPRS must be used. Please consult your GSM
provider if necessary.
In addition to the configuration options of the ZDUE-GPRS-PLUS-VI in CSD
mode, the ZDUE-GPRS-PLUS-VI in GPRS mode can be parameterised via
an IP connection opened by a client.
As in the ZDUE-GPRS-PLUS-VI, see Remote configuration via
the GSM network, p. 27).
As in the ZDUE-GPRS-PLUS-VI , see Local configuration, p. 27.
Configuration is performed using parameterisation software (control centre,
configuration tool (e.g. Dr. Neuhaus ZDUEset, etc.). This transmits the
parameterisation commands to the ZDUE-GPRS-PLUS-VI via the GPRS
network. Transmission likewise takes place according to DIN EN 62056-21
with BCC secured protocol.
The parameterisation commands must be transmitted explicitly to the
address of the ZDUE-GPRS-PLUS-VI. The following device address is
preset at the factory: 99999999
The device address is configurable. It contains 16 characters; numbers and
letters are permitted.
GPRS Modes
Page 43 of 63
Advertisement
Table of Contents
