Table of Contents
Advertisement
6.5.5 Time/date commands
ZDUE-GPRS-PLUS-VI
The time and date commands have no function in the ZDUE-GPRS-PLUS-
VI. They are implemented for reasons of compatibility with other devices
and control centre programs.
The reading of the time and/or date from the ZDUE-GPRS-PLUS-VI makes
available the values that were written to the device previously with the
commands Set time and/or Set date. These data are saved in the device
only in volatile memory, and thus are no longer available after the power
supply is disconnected.
If no time is set, "0000000" is returned as the time; if no date is set,
"0070101".
Setting the time:
Command format: <SOH>W5<STX>0.9.1(ZS7)(set password) <ETX>
<BCC>
Setting the date:
Command format: <SOH>W5<STX>0.9.2(DS7)(set password) ETX>
<BCC>
Reading the time:
Command format: <SOH>R5<STX>0.9.1()<ETX><BCC>
Reply format:
<STX>0.9.1(ZS7)<ETX><BCC>
Reading the date:
Command format: <SOH>R5<STX>0.9.2()<ETX><BCC>
Reply format:
<STX>0.9.2(DS7)<ETX><BCC>
Configuration
Page 37 of 63
Advertisement
Table of Contents
