Table of Contents
Advertisement
Configuration
6.4 Register data set of the ZDUE-GPRS-PLUS-VI
6.4.1 General
EDIS identifier
Field length
1-1:F.F
8
1-1:0.0.0
16 (def. 8)
1-1:0.2.0
8
1-1:0.9.1
6
1-1:0.9.2
6
1-1:C.91.0
15
129-72:23.7.0
15
3
This register is only relevant for GPRS operation in the ZDUE-GPRS-PLUS-VI (see Section 7.4.4). If
the ZDUE-GPRS-PLUS-VIis not operated in GPRS mode, it does not contain any value (empty
brackets). If the ZDUE-GPRS-PLUS-VI is operated in GPRS mode, but it has not received any IP
address from the provider, then the register is given the value "000.000.000.000".
Page 32 of 63
The ZDUE-GPRS-PLUS-VI contains a short set for register data. Output is
made using the DIN EN62056-21 protocol. The register data set is
structured according to the following table.
Format
Hexadecimal
Character string
Character string
hhmmss
YYMMDD
Character string
Character string
The register data set of the ZDUE-GPRS-PLUS-VI receives the values for
time and date that have previously been written with the corresponding set
command. If no time or no date has been set yet, or if the device was
deenergised, then "0000000" is output as the time and/or date respectively.
Example: Accounting data of the ZDUE-GPRS-PLUS-VI
1-1:F.F
(00000005)
1-1:0.0.0
(12345678)
1-1:0.2.0
( 4.016)
1-1:0.9.1
(135224)
1-1:0.9.2
(110326)
1-1:C.91.0
(REVISION 01.002)
129-72:23.7.0 ()
!
T
Function
Error status
Power supply company identification 1
Firmware version of the ZDUE-GPRS-PLUS-VI
Time
Date
Firmware version of the GSM module
Current IP address in GPRS operation
Error status
Power supply company ID
Firmware version of the ZDUE
Time (hhmmss)
Date (yymmdd)
Firmware version of GSM module
[own IP address]
3
3
ZDUE-GPRS-PLUS-VI
Advertisement
Table of Contents
