Error Messages; Set Password - SAGEMCOM Dr. Neuhaus ZDUE-GPRS-PLUS-VI User Manual

Configuration

6.5.1 Error messages

6.5.2 Set password

Page 34 of 63
In unusual circumstances the ZDUE-GPRS-PLUS-VI answers a command
with an error message: <STX>(ERRORnn)<ETX><BCC>
The following error numbers 'nn' can be generated by the ZDUE-GPRS-
PLUS-VI in this case:
Error number (nn) Error
00 Invalid command (data set structure, content)
01 Unknown command (command ID, command type ID)
02
03
04 Invalid class
05
06
07
08
09
10
11 Invalid time/date (impermissible values)
12
13
14 Serial number has already been set [W1-
S96(20)(<data>)]
For the execution of various commands, the transfer of a set password (as a
2nd data set) is necessary. Depending on the parameterisation, the
following cases can arise in communication between ZDUE-GPRS-PLUS-VI
and control centre:
No set password parameterised in the ZDUE-GPRS-PLUS-VI (string
length = 0):
In this case the ZDUE-GPRS-PLUS-VI will not perform any evaluation
of the transmitted set passwords (all password-protected commands
can be executed!).
In this case, the request to transmit the password (P0 operand) when
programming mode is activated may be answered with the password
command (P1 command, password as desired). The control centre
can, however, alternatively also continue the communication with the
transfer of a different permissible VDEW command.
ZDUE-GPRS-PLUS-VI