Metso neles ND7000H Operating Instructions Manual page 65

7 ND90 71 en
FILTER REGULATOR
Filter regulator for supply air.
Filter size 5 μm.
Pressure gauge, scale bar/psi/kPa and kg/cm
brass, nickel plated, housing stainless steel, glycerine filled.
KS Temperature range -40° to +82 °C / -40° to +180 °F.
KS option includes a thread nipple 1/4"NPT to 1/4"NPT between
filter regulator and positioner which is suitable with ND7200
positioner options A3 and A5 (1/4NPT AIR CONNECTION). Supply
air connector in the filter regulator is female 1/4".
Filter regulator for supply air.
Filter size 5 μm.
Pressure gauge, scale bar/psi/kPa and kg/cm2, basic material
brass, nickel plated, housing stainless steel, glycerine filled.
K1S Temperature range -40° to +82 °C / -40° to +180 °F.
K1S option includes a thread nipple 1/4"NPT to G1/4" between
filter regulator and positioner which is suitable with ND9100 and
ND9400 positioner and with option A1 (G1/4 AIR CONNECTION).
Supply air connector in the filter regulator is female 1/4".
Stainless steel (AISI 316) filter regulator for supply air.
Filter size 5 μm.
K2
Pressure gauge, scale bar/psi/kpa/kg/cm2 ,silicone oil, AISI 316,
Temperature range -40° to +80 °C / -40° to +176 °F.
CONDUIT ENTRY NIPPLES
CE07 1/2 NPT conduit entry nipples
M20x1,5 / 1/2 NPT (ND9100 and ND9400)
R1/2 (PF1/2) conduit entry nipples
CE08
M20x1,5 / R1/2 (ND9100 and ND9400)
1/2 NPT conduit entry nipples
CE09
Brass M20x1,5 / 1/2 NPT, Exd approved (ND9200)
CE19 1/2 NPT conduit entry nipples
Stainless Steel M20x1.5 / 1/2 NPT, Exd approved (ND 9300)
CABLE GLANDS
Not to be used together with conduit entry nipples (CE_) or
connection plugs (P_).
CG5 M20x1.5 grey/plastic, IP66
CG6 M20x1.5 blue/plastic, IP66, Ex e
Conduit entry and cable entry adapter for ND9200, ND7200 and
ND9300
CG43
M20 (M) x 1/2NPT (F) SS316
ExdIIC ExdbIIC Gb, IP66
Conduit entry and cable entry adapter for ND9200, ND7200 and
ND9300
CG44
M20 (M) x G1/2 (F) SS316
ExdIIC ExdbIIC Gb, IP66
PRESSURE GAUGES AND CONNECTION BLOCKS
Pressure gauges, scale bar/psi/kPa and kg/cm
nickel plated, housing stainless steel, oil filled. Temperature range -
A1
40° to +85 °C / -40° to +185 °F. Pneumatic connection block,
material AlMgSi1, anodized grey. Connections G1/4 (S, C1, C2).
As A1 but includes two pressure gauges with connections G1/4
A1B
(S, C2). Use with in single acting use only.
Pressure gauges, scale bar/psi/kPa and kg/cm
brass, nickel plated, housing stainless steel, oil filled. Temperature
A3 range -40° to +85 °C / -40° to +185 °F. Pneumatic connection
block, material AlMgSi1, anodized grey. Connections 1/4 NPT (S,
C1, C2), converts also ND91_ connections to 1/4 NPT.
As A3 but two pressure gauges with connections 1/4 NPT (S, C2).
A3B Converts also ND91_ connections to 1/4 NPT.Use with in single
acting use only.
Pneumatic connection block, converts ND91_ connections to 1/
4 NPT. Material AlMgSi1, anodized grey.
A5
Connections 1/4 NPT (S, C1, C2).
Only for ND9100.
Pressure gauges with connections G1/4.
A6
Material AISI 316.
Pressure gauges with connections 1/4 NPT.
A7
Material AISI 316.
Pressure gauges with connections 1/4 NPT for ND9300 or ND9400
A10 AISI 316, pressure gauges for severe off-shore use, safety glass
window.
Non oil filled, dry pressure gauges, scale bar/psi/kPa and kg/cm
basic material brass, nickel plated, housing stainless steel.
Temperature range -40° to +85 °C / -40° to +185 °F.
D3
Pneumatic connection block, material AlMgSi1, anodized grey.
Connections 1/4 NPT (S, C1, C2), converts also ND91_ connections
to1/4 NPT.
As D3 but two pressure gauges with connections 1/4 NPT (S, C2).
D3B Converts also ND91_ connections to 1/4 NPT.Use with in single
acting use only.
ADDITIONAL ACCESSORIES
2
, basic material
P1H
P4H
P2F
P3F
P2P
P3P
DS01
DS02
2
, basic material brass,
DS04
2
, basic material
MS01
MS02
MS03 Mounting set for Masoneilan 87/88 actuators, sizes 6...23.
RR01 C0217108
RR02 C0215954
RC01 H144183
2
, RC02 H126145
RC03 H127093
CONNECTION PLUGS
Not to be used together with conduit entry nipples (CE_) or
cableglands (CG_).
ND9000H (HART):
Connection plug according to M20x1.5 / DIN 43650A (ISO 4400).
Not applicable with 5.sign "F" and "P".
Valve controller and limit switch with connection plugs (1 + 1 pc)
ND9000 (HART): M20x1.5 / DIN 43650A (ISO 4400).
ND9000/K00 or 2 wire ND9100/I00.
Not applicable with 5.sign "F" and "P".
ND9000F and ND9000F/B06 (F
OUNDATION
Connection plug male eurofast, Turck FSV49, M20x1.5 / M12.
Not applicable with 5.sign "H" and "P".
ND9000F and ND9000F/B06 (F
OUNDATION
Connection plug male minifast, Turck RSFV49, M20x1.5 / 7/8".
Not applicable with 5.sign "H" and "P".
ND9000P and ND9000P/B06 (Profibus PA): Connection plug male,
Weidmuller 842593, M20x1.5 / M12.
Not applicable with 5.sign "H" and "F".
ND9000P and ND9000P/B06 (Profibus PA):
Connection plug male minifast, Turck RSFV48, M20x1.5 / 7/8".
Not applicable with 5.sign "H" and "F".
DRIVER SETS
Driver sets including the needed parts when assembling ND9000
on rotary actuators with VDI/VDE 3845 attachment face or Neles
standard mounting faces. Select the correct driver set according
to the actuator and the pneumatic connections of valve controller
or gauge block when applicable.
Note! Earlier the DS04 was delivered with bareshaft positioners as
default. This practice is no longer valid, the needed driver set
must be ordered as an accessory.
Driver set for ND9100 on actuators with VDI/VDE3845
attachment face.
Set includes the G1/4 plug for single acting actuators. The driver
set should also be applied with all ND7/9 with gauge blocks A1,
A1B, A2 or A6.
Driver set for ND92/93/94 on actuators with VDI/VDE 3845
attachment face.
Set includes the 1/4NPT plug for single acting actuators. The
driver set should also be applied with all ND with gauge blocks
A3, A3B, A5, A7 or A10.
General driver set for ND91/92/94/93 on actuators with
VDI/VDE 3845 and Neles standard attachment face (e.g. when
replacing NE/NP7 or ND800 with S2 shaft). Earlier default driver set.
Includes 1/4NPT and G1/4 plugs when used with single acting
actuators.
3RD PARTY MOUNTING SETS
Mounting sets between the ND9000 generation valve controllers
and linear actuators, including bracket and ball joint based
feedback system.
Note! Sets are including the 1/4" pneumatic plugs needed when
used with single acting actuators.
Mounting set for linear actuators, attachment face according to
IEC 60534-6, stroke length 10-55 mm. (H116240)
Mounting set for linear actuators, attachment face according to
IEC 60534-6, stroke length 55-120 mm. (H120404)
Stroke length 12-64 mm. (H120809)
Remote mounting accessories
ID code
ND remote mount rotary sensor QNCOK05HDM
ND remote mount rotary sensor QNCAK05HDM
Cable assembly remote mount sensor cable 1.2 m,
straight connector
Cable assembly remote mount sensor cable 3.0 m,
angle connector
Cable assembly remote mount sensor cable 30 m,
angle connector
65
fieldbus):
fieldbus):
Descpition