7.6 Change a Toner Waste Container
All printers that use toner or ink have a collection device for excess material. This
waste container must periodically be replaced.
Turn the printer OFF before changing the Toner Waste Container.
Open the printer front panel and pull out the cut sheet tray.
Locate and open a new Neuralog supplied Toner Waste Container.
Detailed installation instructions will come with the new part. Follow these
directions.
Open the door and cut sheet tray.
Flip open the two green tabs on the
toner waste container.
With two hands carefully pull the
waste container out.
Make sure the cut sheet tray is
adequately pulled out of the way.
NeuraLabel 500e User Guide
7‐7