Neuralabel 500E Web Interface 6-13. Settings->Continuous Print Settings - Neuralog NeuraLabel 500e User Manual

NeuraLabel 500e User Guide
NeuraLabel 500e Web Interface 6-13. Settings->Continuous Print Settings
Image Stitch should remain UNchecked. This setting tells the printer the image is a
continuous print image but the pages will be separated by gaps.
Cut between copies is normally UNchecked for continuous label printing. This is
necessary to allow batch/copy printing of a single label. Only in the case where copies
of enumerated label batches were printed would the user consider checking cut
between copies. We recommended keeping Cut between copies UNchecked.
Cut between jobs is checked by default. The printer will cut between each job. If
unchecked, the printer will continue to print label jobs without cutting until it has no more
data. If at any time the printer does not have another label batch to process, it will cut
after the current job. If run continuously, subsequent jobs will be printed in one batch.
Customer feedback has indicated that this setting is only needed if speed and media
usage are critical; most customers prefer jobs be separated with the cut.
Image Gap (no marks) is not used for continuous label printing. It would be used if
printing individual pages on continuous media with no marks or label division. It would
define the gap between subsequent pages.
Leading Blank Space indicates the number of blank forms to insert at the beginning of
a label batch print. The default value is 0. Leading Blank Space might be used to add
blank pages for roll to roll applications.
6‐9