Neuralabel What's New, What's Different, What's The Same; Attributes That Affect The Print; Workflow And Mechanical Differences - Neuralog NeuraLabel 500e User Manual

NeuraLabel 500e User Guide
should need to be re-calibrated contact Neuralog Support. A calibration adjustment is available
to the end user. An option is available to turn off cutting between prints.

1.3 NeuraLabel What's New, What's Different, What's the Same

The NeuraLabel 500e was developed as the successor to the original NeuraLabel printer
(NeuraLabel I). This printer uses many of the same engineering concepts as the first
NeuraLabel, while adding some valuable new features and technologies. These sections give a
quick comparison of the two printers. Differences and similarities of the printers are covered so
that users of the original NeuraLabel will have an easy time transitioning to the new device.

1.3.1 Attributes that affect the Print

NeuraLabel 500e has both increased speed and quality. It also has additional features related to
controlling cutting and setting a top margin. The table below depicts some of these differences
as well as similarities.
Table: Comparison of Original NeuraLabel and NeuraLabel 500e Attributes
NeuraLabel 500e
Maximum Print ips (inches per second)
Speed
 Faster
Time to First Print
 More efficient file compression
(TTFP)
 Faster on‐board processor
 Improved toner transfer system with new
Print Quality
 Improved overall ITU transfer quality from
 Improved placement of yellow screens
Cutter Control Turn Cutter ON/OFF between copies or jobs
Next copy/print syncs to top of form
Blank Leader Page Settable, if needed
Top Margin Settable top margin; default 1/6 inch
Printer Drivers NeuraPrinter, available from Neuralog, PCL 6
Print Resolution 4800 CQ, 300 Enhanced
Neuralog Universal Print Driver, PCL5
4800 CQ, 1200dpi

1.3.2 Workflow and Mechanical Differences

There are a few other differences to note between the two printers. Critical to know for clients
who are familiar with the original NeuraLabel is that the label media is loaded differently for
NeuraLabel 500e. Other minor differences are listed below.
1‐6
second transfer configuration
drastically improved belt material
leading to better color accuracy
NeuraLabel I
6.8 ips
Always cut after copy or job
2‐3 blank labels required
Default margin of 1/6 inch
NeuraLaserColor EX/NeuraLabel,
similar