Neuralog NeuraLabel 500e User Manual page 96

NeuraLabel 500e User Guide
Remove the four Toner Cartridges and
the Toner Waste Container before
changing the ITU. (You are not able to
remove the ITU without this step.)
With two hands firmly pull out on the
blue-gray ITU handle to remove it from
the printer.
 Once installed, verify that the ITU is securely in place and close the printer door.
 Re-install the Continuous Form Attachment.
 Turn the printer ON.
 In a few moments the printer status will update and your printer will once again
be ready to print.
7‐6
Changing the Image Transfer Unit or ITU Belt.
Toner Waste
Container