Neuralabel 500E Web Interface 6-12. Settings->Security - Neuralog NeuraLabel 500e User Manual

NeuraLabel 500e User Guide
The ability to enable/disable USB device printing for particular times of the day is a
setting available in this area. See you system administrator or contact Neuralog support
if you need further help with setting up security for your printer.
NeuraLabel 500e Web Interface 6-12. Settings->Security
6.1.3.6 Continuous Print
The NeuraLabel 500e printer has a special panel with continuous print settings for
continuous label printing. These settings will be preset for your printer and will not
normally need to be changed. There are a few settings that you may wish to change
from the default configuration. Each setting is described below.
6‐8