Neuralabel 500E Web Interface 6-8. Print Settings Overview - Neuralog NeuraLabel 500e User Manual

NeuraLabel 500e User Guide

NeuraLabel 500e Web Interface 6-8. Print Settings Overview

6.1.3.2.1 Finishing Menu
The Finishing Menu is used for cut sheet printing only. It controls options such as
collation and duplexing. These controls can also be set within the print driver.
6.1.3.2.2 Quality Menu
The Quality Menu allows you to set things such as resolution and toner darkness.
These items will be overridden by the settings from the NeuraLabel 500e driver, so they
are only relevant if you are printing cut sheet documents with another print driver. A
Universal print driver is also available for continuous label printing. Contact Neuralog if
you need additional information.
6.1.3.2.3 Supply Notifications
The NeuraLabel 500e was designed with maximum flexibility for monitoring printing
consumables. The Supply Notifications page allows you to configure how and when
you will be notified for low supplies. Neuralog's recommended settings are provided in
the table below. You may choose to modify these settings. For example a single user
who watches the printer closely may choose to turn OFF these settings or change to
Warning only. Print center users who are producing prints in mass quantities might
need the higher level warnings to ensure the printer is not printing with empty
cartridges. It is easy to experiment with these settings because they can be changed at
any time.
6‐5