T Marker Value Display - HP 16534A User Reference

The Marker Menu

T Marker Value Display

As you move the Tx marker from a low portion on the waveform to a high
portion, the X voltage value under the input label in the channel label field
also changes.
When you touch the Trig to O field and turn the knob, the To marker
(yellow) will move, and the time and voltage values will change just as they
did for the Tx marker.
When you touch the Tx to To field and turn the knob, the Tx and To markers
will move in unison and maintain the preset Tx to To time value.
You can also change the Tx to To, Trig to X, and Trig to O fields with the
pop-up keypad. Refer to the earlier paragraph entitled "Tx to To Field" for a
description and results of keypad entries in the Tx to To field.
T Marker Value Display
Any time the markers (either voltage and/or time) are turned on, the current
marker settings may be displayed on the channel, trigger, display and
auto-measure menus by using the Display Options field located to the right
of the time base Delay field. The Display Options field provides a pop-up
menu that allows you to either select to set channel labels or to view the
Sample Period display or the Marker Value display.
The Marker Value display consists of two blocks. One contains settings for
the voltage markers, the second contains settings for the time markers. If
only one set of markers is turned on, only one of the two blocks will appear
on the screen.
On the Marker menu, if time markers are turned off, the Sample Period
display will appear on the marker menu. If time markers are selected as
either On or Auto, the Sample Period display is not visible on the Marker
menu.
The Display Options field never appears on the Marker menu.
5-9