Table of Contents
Advertisement
Pattern Trigger Mode
When you are set up in a multi-card configuration, only the master
card input channels are recognized as the trigger source. The
oscilloscope will not pattern trigger on inputs from the other cards in
a multi-card setup.
This chapter discusses how pattern triggering works in a single-card
module or in the master card in a multi-card module.
Pattern trigger mode allows you to trigger the oscilloscope upon
entering or exiting a specified pattern of the trigger channels and the
external trigger input or by specifying a pattern duration or range.
When you have two or more HP 16533/34A modules connected
together, you can only specify the channels on the master
HP 16533/34A module as the trigger source.
When you touch the Mode field, Pattern can be selected from the
pop-up menu.
6-11
Advertisement
Table of Contents
